Images are representations only.
Model PT-1 Pressure Tester
Brand: Ashcroft Inc.The Ashcroft® PT-1 bench-top calibrator is used on measurement applications requiring highly accurate secondary transfer standards.
The PT-1 includes 1 or 2 permanently installed pressure or temperature sensors.
Features- Simultaneously display the output of two pressure sensors, two RTD’s or one of each
- 12 standard user selectable engineering units and one custom value
- Dedicated front panel buttons to set zero, check maximum/minimum values, adjust measurement damping, select either or both ports for standard display, additive or differential display, print the display and configure the RS232 output
- All front panel features are accessible via the RS232 port for remote configuration or data acquisition
Specifications
Brand
Accuracy
- ± 0.025% of Span
- ± 0.05% of Span
- ± 0.1% of Span
Applications
- Calibration Labs
- Test & Measurement
Approvals & Certifications
- ISO 9001
Communication
- RS-232
Compensated Temperature
- -7° to 49° C (20° to 120° F)
Display
- Backlit
- Size: 16 Alphanumeric Character/Line, Maximum
- Size: 2 Line, 0.38" Height Per Line
Enclosure, Body Material
- High Impact ABS, Black
Media
- PPM1 Sensor Typical: Clean, Dry, Non-Conductive, Non-Corrosive Gas
NACE & NIST
- NIST
NPT Inlet
- 1/8" NPT Female
NPT Outlet
- 1/8" NPT Female
Operating Temperature
- 0° to 49° C (32° to 120° F)
Overpressure & Static Pressure Limits
- 150% for Ranges of psi: 1,500 (kPa: 10,340, bar: 103.4) & above
- 200% for Ranges of psi: 5 to 1,000 (kPa: 34.47 to 6,895, bar: 0.34 to 68.95)
- Overpressure psi: -15 to 50 (-103.4 to 344.7, bar: -1 to 3.447)
Power Requirement
- AC Adapter Provided for Operation Off Standard 110 Vdc, 60 Hz
Pressure Range
- psi: 5 to 10,000 (kPa: 34.47 to 68,950, bar: 0.34 to 689.5)
Pressure Type
- Absolute
- Compound Pressure
- Differential
- Gauge (Sealed Gauge over 300 psi)
- Vacuum
Repeatability
- ± 0.01% of Span (All psi Ranges, Ranges of 1" through 200" H₂O)
- ± 0.02% of Span (Ranges Below 1" H₂O)
Resolution
- ± 0.002% of Span, Maximum
RTD Type
- Pt100
- Pt1000
Sensor, Probe Type
- Platinum RTD
Storage Temperature
- -20° to 70° C (-4° to 158° F)
Temperature Effect
- Zero & Span: ± 0.004% of Span / °F from A Reference Temperature of 70° ± 3° F
Update Time
- Display Update: 100 milliseconds
- Warm-Up: 30 minutes to Complete Stability
- Warm-Up: 5 minutes to Rated Accuracy
