Emerson Appleton Vertical Conduit Drain Sealing Fitting, EYDM
Images are representations only.

Appleton™ EYDM 25% Fill Vertical Conduit Drain Sealing Fittings

Brand: Appleton
Request Information
Favorite

Emerson Appleton Vertical Conduit Drain Sealing Fitting, EYDM Emerson Appleton Vertical Conduit Drain Sealing Fitting, EYDM
Appleton™ EYDM 25% fill vertical conduit drain sealing fittings prevent the passage of gases, vapors or flames from one portion of a conduit system to another. They also restrict large amounts of ignitable gases or vapors from accumulating to confine explosive pressure. Appleton sealing fittings are explosionproof, dust-ignitionproof and raintight. They are suitable for use in Class I and II locations.
Features
  • Explosionproof, dust-ignitionproof, raintight.

  • Prevent passage of gases, vapors or flames from one portion of conduit system to another. Restrict any explosion to the sealed off enclosure. Prevent pressure piling within conduit system.

  • Required in Class I, Division 1 and 2 locations within 18" of enclosures containing apparatus that may cause arcs, sparks or high temperatures.

  • Required in Class I, Division 1 and 2 locations where 2" or larger conduit enters enclosure, fitting housing terminals, splices or taps.

  • Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location.

  • Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36" or less conduit. Seal must be located within 18" of either enclosure.

  • Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations.

  • Smooth, rounded integral bushing in each hub protects conductor insulation.

  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity.

  • Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub.

  • UL Listed for use with Kwiko™ A Sealing Compound. Also listed with certain competitors sealing cement, contact factory for details.

  • Access cover has drain valve for automatic draining of water accumulation above the seal.

    • Specifications

    Brand

    NEC/CEC Certifications & Compliances

    • Class I, Division 1 & 2, Groups B, C, D, Class II, Division 1 & 2, Groups E, F, G, Class III

    Standard Material & Finishes

    • Malleable Iron with Triple-coat Finish (1) Zinc Electroplate, (2) Chromate, & (3) Epoxy Powder Coat, or Almag 35 Aluminum with Epoxy Powder Coat

    Documentation

    Product Manuals

    Catalogs

    show more