Images are representations only.
6012P 3/2-Way Mini Solenoid Valve
Brand: Burkert Fluid Control SystemsType 6012P was developed as a special pilot valve for direct attachment to externally piloted pneumatic actuators. It consists of the solenoid actuator of Type 6012 and a special connection housing with banjo bolts for simple connection to the pilot air port of the actuator.
The valve is equipped with manual override as standard.
Features:
- Direct-acting
- psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)
- DN 1.2
- G1/8", G1/4" and tube fitting Ø0.236" (6 mm), banjo-bolt connection
- 0.826" (21 mm) coil spacing when mounted on manifold
Specifications
Ambient Temperature Range
- -10° to 40° C (14° to 104° F)
BSP Connection
- G 1/4" Female
- G 1/8" Female
Cable Material
- Cable Plug: Polyamide (PA)
Consumption
- Power Consumption (Hold): 6 VA (4 W)
- Power Consumption (Inrush): 4 W
- Power Consumption (Inrush): 9 VA
Duty Cycle
- Duty Cycle / Single Valve for Block Assembly on Multiple Manifold: 100% Continuous Rating Intermittent Operation 60% (30 minutes) with 2 W Coil 100%
Electrical Connectors
- According to DIN 43650 Form B (Industrial Standard) for Cable Plug Typical 2507
- According to DIN EN 175301-803 Form C for Cable Plug Typical 2506
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- Polyamide (PA)
Environmental Protection
- IP65 with Cable Plug
Flow Rate
- Water: 0.045 to 0.060 Kv (m³/hour)
Materials of Construction
- Coil (DIN EN 175301-803) Form B (Industrial Standard): Epoxy
- Coil (DIN EN 175301-803) Form C: Polyamide (PA)
- Guide Tube: 305 Stainless Steel, 1.4303
- Stopper, Core: 430FR Stainless Steel (1.4105)
- Sub-Base: Nickel-Plated Surface - Stainless Steel Version
- Sub-Base: Zinc Surface (Zn3 Gl CC) - Brass Version
Media
- Neutral Gases (Compressed Air)
Mounting
- Manifold
Mounting Position
- Preferably with Actuator Upright
Nut & Bolt Material
- Banjo Bolt: Nickel-Plated Brass
O-Ring Material
- FKM
Operating Voltages
- 24 Vdc
- 24-230 V / 50 Hz
Orifice Size
- 0.047" (1.2 mm)
Override
- Manual Override
Power
- Coil Power (AC or DC): 4 W
Pressure Range
- psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)
Process Temperature
- -10° to 60° C (14° to 140° F)
Response Time
- Closing: 9 to 12 milliseconds (Pressure Relief 100 to 10%)
- Opening: 7 to 12 milliseconds (Pressure Build-up 0 to 90%)
Ring Material
- Shading Ring: Copper
- Shading Ring: Silver
Seat / Seal Material
- Armature Seal: FKM
- Flat Seal: NBR
Solenoid Type
- 3/2-Way
Spring Material
- 301 Stainless Steel, 1.4310
Tolerance
- Voltage Tolerance: ± 10%
Tube Connection
- Ø6 mm Tube Fitting
