280 2/2-Way Solenoid Valve

Brand: Burkert Fluid Control Systems

Type 280 is a normally closed or normally open servo-assisted solenoid valve (circuit functions A and B).

For circuit function A, the valve is normally closed by spring action assisted by the fluid pressure. When de-energized, a pressure is built up above the servo diaphragm pressing it down to close the valve. When energized, the space above the servo diaphragm is exhausted via the pilot valve, the diaphragm is lifted by the fluid pressure to open the valve.

Circuit function B, normally open, provides the opposite function. It is important to note that the media is exhausted to atmosphere via the pilot operator when the valve is de-energised. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.
Features
  • Normally closed or open
  • Body material: brass
  • High flow rate
  • Compact design 

Specifications

Ambient Temperature Range

  • Maximum

Applications

  • Circuit Function B for Air or Gases
  • Fire Protection Installations
  • Irrigation Systems
  • Laundries
  • Machine Tools
  • Neutral Gases & Liquids
  • Sanitary Applications
  • Varnishing Technology

BSP Connection

  • G 1/2" Female - Valve
  • G 1/4" Female - Valve
  • G 3/8" Female - Valve

Consumption

  • Power Consumption (AC Hold, DC): 8 W - Actuator
  • Power Consumption (AC): 12 VA (Hold) - Actuator
  • Power Consumption (AC): 21 VA (Inrush) - Actuator

Cycling Rate

  • 0 to 100 cycles/minute - Actuator

Duty Cycle

  • 100% Continuous Rating - Actuator

Electrical Connectors

  • Cable Plug for 7 mm ø Cable, Moulded-in Cable, Cable Plug for 9 mm ø Cable

Electrical Contacts

  • Normally Closed
  • Normally Open

Enclosure, Body Material

  • Brass

Environmental Protection

  • with Cable Plug or Cable IP65 - Actuator

Flow Rate

  • 0.8 to 4 Kv (m³/hour)
  • 1,000 to 4,300 QNn (L/min)

Materials of Construction

  • Valve Internals: 316Ti Stainless Steel, 1.4542
  • Valve Internals: 430F Stainless Steel, 1.4104

Mounting Position

  • Preferably with Solenoid System Upright

Operating Voltages

  • 24-230 V / 50 Hz - Actuator

Orifice Size

  • 0.31" to 0.51" (8 to 13 mm)

Pressure Range

  • psig: 2.901 to 232.1(kPa: 20 to 1,600, bar: 0.2 to 16)

Response Time

  • Closing: Approximately 400 milliseconds - Valve
  • Opening: Approximately 50 milliseconds - Valve

Seat / Seal Material

  • Seal: EPDM (Fluids Handled: Oils & Fat-Free Fluids, Hot Water Alkaline Washing & Bleaching Lyes) - Valve
  • Seal: fpm (Fluids Handled: Hot Air, Oxygen, Per-Solutions, Hot Oils with Additives) - Valve
  • Seal: NBR (Fluids Handled: Neutral Fluids, Compressed Air, Town Gas, Water, Hydraulic Oil, Oils & Fat without Additives) - Valve

Solenoid Type

  • 2/2-Way

Temperature Range

  • EPDM: -40° to 90° C (-40° to 194° F) - Valve
  • NBR, FPM: -10° to 90° C (14° to 194° F) - Valve

Tolerance

  • Voltage Tolerance: ± 10% - Actuator

Viscosity

  • Maximum

show more