6211 2/2-Way Diaphragm Solenoid Valve

Brand: Burkert Fluid Control Systems

The Type 6211 is a servo-assisted normally closed 2/2-way solenoid valve with a servo diaphragm for use especially with neutral fluids and gaseous media.

The valve has a low power consumption, low weight and a compact body. The valve is normally closed by spring force. Energized, the solenoid opens the pilot valve first. Then the medium pressure opens the main valve due to the pressure drop above the diaphragm. The valve opens.

The special design and geometry of the inner parts of the valve result in a soft closing function and cause almost no water hammer. 

Features:
  • Push-over solenoid system AC07
  • Energy-saving AC07 coil, maximum DN 20
  • Body in brass
  • Pressure range psi: 7.252 to 145 (kPa: 50 to 1,000, bar: 0.5 to 10)

Specifications

Ambient Temperature Range

  • Maximum

Approvals & Certifications

  • CSA
  • RoHS
  • UR

BSP Connection

  • G 1" Female
  • G 1/2" Female
  • G 3/4" Female
  • G 3/8" Female
  • 1" BSPT Female
  • 1/2" BSPT Female
  • 3/4" BSPT Female
  • 3/8" BSPT Female

Consumption

  • Power Consumption (AC): 6 VA (Hold)
  • Power Consumption (AC): 9 VA (Inrush)
  • Power Consumption (DC): 4 W (Inrush (Hot), Hold)
  • Power Consumption (DC): 5 W (Inrush (Cold))

Cover Material

  • Body Cover: Polyamide
  • Body Cover: Polyphenylene Ether

Diaphragm Material

  • Diaphragm Holder, Support: Polyphenylene Sulfide
  • Diaphragm Holder: Brass

Duty Cycle

  • 100% Continuous Rating

Electrical Connectors

  • According to DIN 43650 Form B (Industrial Standard) for Cable Plug Typical 2507
  • According to DIN EN 175301-803 Form C for Cable Plug Typical 2516

Electrical Contacts

  • Normally Closed

Enclosure, Body Material

  • Brass (DIN 50930-6)

Environmental Protection

  • IP65 with Cable Plug

Flange Material

  • Steel (Thick Fillm Passivated According to Rohs)

Flow Rate

  • Water: 1.9 to 8.3 Kv (m³/hour) Measured at 20° C (68° F) & psi: 14.5 (kPa: 100, bar: 1) Pressure Differential over A Fully Opened Valve

Materials of Construction

  • Coil (Cable Plug Form B - Class H, Flying Leads): Epoxy
  • Coil (Cable Plug Form C - Class B): Polyamide
  • Plunger: 430FR Stainless Steel (1.4105)

Mounting Position

  • Preferably with Actuator Upright

NPT Connection

  • 1" NPT Female
  • 1/2" NPT Female
  • 3/4" NPT Female
  • 3/8" NPT Female

Nut & Bolt Material

  • Bolt: Brass
  • Locknut: Steel (Thick Film Passivated According to Rohs)

O-Ring Material

  • EPDM
  • FKM
  • NBR

Operating Voltages

  • 24 Vdc
  • 24-230 V / 50/60 Hz

Orifice Size

  • 0.39" to 0.78" (10 to 20 mm)

Pressure Range

  • psi: 7.252 to 145 (kPa: 50 to 1,000, bar: 0.5 to 10)

Process Temperature

  • EPDM: -10° to 70° C (14° to 158° F)
  • NBR, FKM: 0° to 70° C (32° to 158° F)

Response Time

  • Closing: 100 to 700 milliseconds (Pressure Relief 100 to 10%)
  • Opening: 20 to 400 milliseconds (Pressure Build-Up 0 to 90%)

Ring Material

  • Shading Ring: Copper

Seat / Seal Material

  • Seal: EPDM (Media: Oil & Fat-Free Media, Alkaline Washing & Bleaching Lyes)
  • Seal: FKM (Media: Per-Solutions, Oils with Additives)
  • Seal: NBR (Media: Neutral Gases & Fluids, Compressed Air, Water, Hydraulic Oil, Oil, Fat without Additives)

Solenoid Type

  • 2/2-Way

Spring Material

  • 301 Stainless Steel, 1.4310

Tolerance

  • Voltage Tolerance: ± 10%
show more