Images are representations only.
8110 Vibrating Level Switch
Brand: Burkert Fluid Control Systems
The 8110 is a vibrating level switch for liquids, using a tuning fork for level detection. It is designed for industrial use in areas of process technology and can be used in liquids.
Typical applications are overfill or dry run protection. The small tuning fork (40 mm of length) allows the use in vessels, tanks and pipes.
Due to the simple and rugged measuring system, the 8110 is virtually unaffected by the chemical and physical features of the liquid. It works even under unfavourable conditions such as turbulences, air bubbles, foam generation, buildup or varying products.
Features- For universal use as overfill or dry run protection system
- Setup without adjustment
- Smallest mounting dimensions
Specifications
Ambient Temperature Range
- Operating: -40° to 70° C (-40° to 158° F)
- Storage: -40° to 80° C (-40° to 176° F)
Applications
- Chemical Industry - Solvents, Reactors
- Pipelines
- Water/Sewage Water Plants
Approvals & Certifications
- Security: EN 61010-1
Approvals & Certifications
- EMC EN 61326
BSP Connection
- G 1" Male
- G 1/2" Male
- G 3/4" Male
Consumption
- PNP Transistor Output (Power): 0.5 W, Maximum
Current
- Domestic Current Requirement (Contactless Electronic Switch Output): Approximately 3 mA (Via the Load Circuit) (Not with PLC)
- PNP Transistor Output (Blocking Current): < 10 µA
Delay Time
- Approximately 500 milliseconds
Density Range
- 0.7 to 2.5 g/cm² (0.025 to 0.09 Lbs/in²)
Electrical Connectors
- Cable Plug According to EN 175301-803
- M12 x 1 Male Fixed Connector
Enclosure, Body Material
- 316L Stainless Steel
- Plastic PEI (Polyetherimide)
Environmental Protection
- IP65
- IP66
- IP67
Frequency
- Approximately 1,200 Hz
Hysteresis
- Approximately 2 mm (0.08") with Vertical Installation
Indication
- PNP Transistor Output: LED Indication (Green & Red)
Load
- Contactless Electronic Switch Output (Load Current): 10-250 mA
- PNP Transistor Output (Load Current): 250 mA - Maximum
Materials of Construction
- Tuning Fork & Fitting: 316L Stainless Steel 1.4435
NPT Connection
- 1" NPT Male
- 1/2" NPT Male
- 3/4" NPT Male
Pipe Connection
- DN25 Pipe - DIN 11851
- DN38 Pipe - SMS 1145
- DN40 Pipe - DIN 11851
- DN50 Pipe - DIN 11851
Power Supply
- Contactless Electronic Switch Output: 20-253 Vac at 50/60 Hz
- Contactless Electronic Switch Output: 20-253 Vdc
- PNP Transistor Output: 10-35 Vdc
Pressure Range
- psi: -14.5 to 928 (kPa: -100 to 6,400, bar: -1 to 64)
Process Temperature
- -40° to 100° C (-40° to 212° F) [150° C (302° F) for Clamp Process Connection]
Seat / Seal Material
- Process Seal: Klingersil C 4400
Switch Type
- Transistor - PNP
Tri-Clamp Connection
- 1" Tri-Clamp®
- 1-1/2" Tri-Clamp®
- 2" Tri-Clamp®
Viscosity
- Dynamic Viscosity: 0.1 to 10,000 MPa-s
Voltage
- PNP Transistor Output (Turn-on Voltage): 34 Vdc, Maximum
Voltage Drop
- PNP Transistor Output: 3 Vdc, Maximum
