8110 Vibrating Level Switch

Brand: Burkert Fluid Control Systems

The 8110 is a vibrating level switch for liquids, using a tuning fork for level detection. It is designed for industrial use in areas of process technology and can be used in liquids.

Typical applications are overfill or dry run protection. The small tuning fork (40 mm of length) allows the use in vessels, tanks and pipes.

Due to the simple and rugged measuring system, the 8110 is virtually unaffected by the chemical and physical features of the liquid. It works even under unfavourable conditions such as turbulences, air bubbles, foam generation, buildup or varying products.
Features
  • For universal use as overfill or dry run protection system
  • Setup without adjustment
  • Smallest mounting dimensions

Specifications

Ambient Temperature Range

  • Operating: -40° to 70° C (-40° to 158° F)
  • Storage: -40° to 80° C (-40° to 176° F)

Applications

  • Chemical Industry - Solvents, Reactors
  • Pipelines
  • Water/Sewage Water Plants

Approvals & Certifications

  • Security: EN 61010-1

Approvals & Certifications

  • EMC EN 61326

BSP Connection

  • G 1" Male
  • G 1/2" Male
  • G 3/4" Male

Consumption

  • PNP Transistor Output (Power): 0.5 W, Maximum

Current

  • Domestic Current Requirement (Contactless Electronic Switch Output): Approximately 3 mA (Via the Load Circuit) (Not with PLC)
  • PNP Transistor Output (Blocking Current): < 10 µA

Delay Time

  • Approximately 500 milliseconds

Density Range

  • 0.7 to 2.5 g/cm² (0.025 to 0.09 Lbs/in²)

Electrical Connectors

  • Cable Plug According to EN 175301-803
  • M12 x 1 Male Fixed Connector

Enclosure, Body Material

  • 316L Stainless Steel
  • Plastic PEI (Polyetherimide)

Environmental Protection

  • IP65
  • IP66
  • IP67

Frequency

  • Approximately 1,200 Hz

Hysteresis

  • Approximately 2 mm (0.08") with Vertical Installation

Indication

  • PNP Transistor Output: LED Indication (Green & Red)

Load

  • Contactless Electronic Switch Output (Load Current): 10-250 mA
  • PNP Transistor Output (Load Current): 250 mA - Maximum

Materials of Construction

  • Tuning Fork & Fitting: 316L Stainless Steel 1.4435

NPT Connection

  • 1" NPT Male
  • 1/2" NPT Male
  • 3/4" NPT Male

Pipe Connection

  • DN25 Pipe - DIN 11851
  • DN38 Pipe - SMS 1145
  • DN40 Pipe - DIN 11851
  • DN50 Pipe - DIN 11851

Power Supply

  • Contactless Electronic Switch Output: 20-253 Vac at 50/60 Hz
  • Contactless Electronic Switch Output: 20-253 Vdc
  • PNP Transistor Output: 10-35 Vdc

Pressure Range

  • psi: -14.5 to 928 (kPa: -100 to 6,400, bar: -1 to 64)

Process Temperature

  • -40° to 100° C (-40° to 212° F) [150° C (302° F) for Clamp Process Connection]

Seat / Seal Material

  • Process Seal: Klingersil C 4400

Switch Type

  • Transistor - PNP

Tri-Clamp Connection

  • 1" Tri-Clamp®
  • 1-1/2" Tri-Clamp®
  • 2" Tri-Clamp®

Viscosity

  • Dynamic Viscosity: 0.1 to 10,000 MPa-s

Voltage

  • PNP Transistor Output (Turn-on Voltage): 34 Vdc, Maximum

Voltage Drop

  • PNP Transistor Output: 3 Vdc, Maximum

show more