Images are representations only.
8010 Inline Paddle Wheel Flow Switch
Brand: Burkert Fluid Control Systems
The Inline flow sensor/switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/maximum values of flow. The sensor/switch is made up of a sensor fitting (Type S010) and an electronic module (Type SE10), quickly and easily connected together by a Quarter-Turn.
The 8010, which is uni-directional, should be mounted in respect of the arrow that indicates the flow direction. The device indicates the presence of a flow in the pipe by switching the Reed contact contained in the electronic module. The switching points minimum/maximum for rising and falling velocities can be set with a screw within a defined range.
Features- Economic integration in pipe systems without any additional piping
- Magnetic measuring principle
- Mechanical adjustment of setpoint
Specifications
Ambient Temperature Range
- Operating & Storage: 0° to 55° C (32° to 131° F)
Approvals & Certifications
- CE
- EU Directives
- PED 2014/68/EU
BSP Connection
- G 1" Female
- G 1" Male
- G 1/2" Female
- G 1-1/2" Female
- G 1-1/2" Male
- G 1-1/4" Female
- G 1-1/4" Male
- G 2" Female
- G 3/4" Female
- G 3/4" Male
- 1" BSPT Female
- 1/2" BSPT Female
- 1-1/2" BSPT Female
- 1-1/4" BSPT Female
- 2" BSPT Female
- 3/4" BSPT Female
Cable Length
- 328.1 feet (100 meters), Maximum
Cover Material
- 20% Glass Fibre Reinforced
Diameter
- Pipe: 1/2 to 2" (DN15 to DN50)
Electrical Connectors
- 0.14 to 0.5 mm² Cross Section
- Cable Plug: EN 175301-803
Electrical Contacts
- Normally Closed
- Normally Open
- Reed Contact
Electrical Rating
- 0.8 A at 150 Vdc / 250 Vac, Maximum
- 2.5 A at 50 W, Maximum
Enclosure, Body Material
- Polycarbonate (PC)
Environmental Protection
- IP65
Flange Size - 1-1/2" (DN40)
- 1-1/2" (DN40) - JIS 10K (ANSI B16-5)
- 1-1/2" (DN40) - PN 16 (EN1092-1/B1)
Flange Size - 1-1/4" (DN32)
- 1-1/" (DN32) - JIS 10K (ANSI B16-5)
- 1-1/4" (DN32) - PN 16 (EN1092-1/B1)
Flange Size - 1" (DN25)
- 1" (DN25) - JIS 10K (ANSI B16-5)
- 1" (DN25) - PN 16 (EN1092-1/B1)
Flange Size - 1/2" (DN15)
- 1/2" (DN15) - JIS 10K (ANSI B16-5)
- 1/2" (DN15) - PN 16 (EN1092-1/B1)
Flange Size - 2" (DN50)
- 2" (DN50) - JIS 10K (ANSI B16-5)
- 2" (DN50) - PN 16 (EN1092-1/B1)
Flange Size - 3/4" (DN20)
- 3/4" (DN20) - JIS 10K (ANSI B16-5)
- 3/4" (DN20) - PN 16 (EN1092-1/B1)
Flow Rate
- 10 m/sec, Maximum
Humidity
- ≤ 80% Relative Humidity, Non-Condensing
NPT Connection
- 1" NPT Female
- 1/2" NPT Female
- 1-1/2" NPT Female
- 1-1/4" NPT Female
- 2" NPT Female
- 3/4" NPT Female
O-Ring Material
- EPDM
- FKM
Pipe Connection
- DN15 Pipe
- DN20 Pipe
- DN25 Pipe
- DN32 Pipe
- DN40 Pipe
- DN50 Pipe
Plug Material
- Cable Plug: Polyamide (PA)
Pressure Range
- with Metal Sensor Fitting - psi: 0 to 232.1 (kPa: 0 to 1,600, bar: 0 to 16), Maximum
- with Plastic Sensor Fitting - psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10), Maximum
Process Connection Material
- Metal
- Plastic
Process Temperature
- with Sensor Fitting in PP, PVDF, Brass, Stainless Steel: 0° to 55° C (32° to 131° F)
- with Sensor Fitting in PVC: 0° to 50° C (32° to 122° F)
Screw Material
- Setting Screw: Plated Brass
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Switch Point Range
- 4.7 to 75.4 L/minute
Tri-Clamp Connection
- DN15 Tri-Clamp®
- DN20 Tri-Clamp®
- DN25 Tri-Clamp®
- DN32 Tri-Clamp®
- DN40 Tri-Clamp®
- DN50 Tri-Clamp®
Viscosity
- 100 cSt, Maximum
Welded Connection
- DN 15 Weld End
- DN 20 Weld End
- DN 25 Weld End
- DN 32 Weld End
- DN 40 Weld End
- DN 50 Weld End
Wetted Materials
- Fitting, Sensor Holder & Axis: 316L Stainless Steel, 1.4404
- Fitting, Sensor Holder & Blade: PVDF
- Fitting, Sensor Holder: Brass (CuZn₃₉Pb₂)
- Fitting, Sensor Holder: Polypropylene (PP)
- Fitting, Sensor Holder: PVC
