Images are representations only.
8075 Positive Displacement Batch Controller
Brand: Burkert Fluid Control Systems
This positive displacement flow batch controller with display is designed for use in slightly viscous fluid like glue, honey or oil. The batch controller is made up of a compact sensor fitting (S070) and an electronic module (SE35) quickly and easily connected together by a Quarter-Turn.
Features- Compact version for DN15 to DN100
- Dosing
- On site calibration by Teach-In
- Check of input/output signals
- Total and daily totalizers for batch quantity and number of batches, volume or mass totalizers displayed
Specifications
Accuracy
- ± 0.5% of Reading
Ambient Temperature Range
- Operation & Storage (Version 115/230 Vac): -10° to 50° C (14° to 122° F)
- Operation & Storage (Version 12-36 Vdc): -10° to 60° C (14° to 140° F)
Approvals & Certifications
- Security: EN 61010-1
Approvals & Certifications
- CE
- EMC: EN 61000-6-2, EN 61000-6-3
- UL (C,US): 61010-1 + CAN/CSA-C22 No.61010-1
Cable Length
- 164 feet (50 meters)
Circuit Protection
- Protected Against Short Circuits
Consumption
- Current with Sensor (without Consumption of Digital Input & Pulse Output): ≤ 45 mA at 36 Vdc with Relays
- Current with Sensor (without Consumption of Digital Input & Pulse Output): ≤ 90 mA at 12 Vdc with Relays
Cover Material
- Polycarbonate (PC)
Current
- 125 mA - Maximum
Diameter
- Pipe: 1/2 to 4" (DN15 to DN100)
Display
- 15 x 60 mm, 8-Digit LCD, Alphanumeric, 15-Segments, 9 mm High
Electrical Connectors
- 1.5 mm², Maximum
- Cable Glands M20 x 1.5
Electrical Protection
- Protected Against Overvoltage
Enclosure, Body Material
- Polycarbonate (PC)
Environmental Protection
- IP65
Flange Size - 1-1/2" (DN40)
- Unrated
Flange Size - 1" (DN25)
- Unrated
Flange Size - 2" (DN50)
- Unrated
Flange Size - 3" (DN80)
- Unrated
Flange Size - 4" (DN100)
- Unrated
Frequency
- Output (Transistor): 0.6 to 2,200 Hz
Gland Material
- Cable Glands: Polyamide (PA)
Humidity
- ≤ 80% Relative Humidity, Non-Condensing
Indication
- LED
Input
- DI (1 to 4) - Switching Threshold Voff : 2 Vdc, Maximum
- DI (1 to 4) - Switching Threshold Von: 5-36 Vdc
Input Impedance
- 9.4 KiloOhms
Materials of Construction
- Front Panel Foil: Polyester
- Lid: Polycarbonate (PC)
Measuring Range
- Viscosity < 5 MPa.s: 3 to 616 L/minute
- Viscosity > 5 MPa.s: 2 to 1,200 L/minute
Nut & Bolt Material
- Nut: Polycarbonate (PC)
Output
- Transistors (DO1 & DO4) - Line Drop: 2.7 Vdc at 100 mA
- Transistors (DO1 & DO4): 100 mA - Maximum
- Transistors (DO1 & DO4): 5-36 Vdc
Power
- 3 VA
- Relay Output (Cutting Power): 750 VA, Maximum
Power Supply
- 115/230 Vac at 50/60 Hz
- 12-36 Vdc, Maximum
Pressure Range
- bar: 0 to 55
- kPa: 0 to 5,500
- psi: 0 to 798
Process Temperature
- Aluminum Body: 0° to 80° C (32° to 176° F)
- Stainless Steel Body: 0° to 100° C (32° to 212° F)
Relay Output
- DO2 & DO3, 230 Vac / 3 A (Resistive Load)
- DO2 & DO3: 2 Relays (Normally Open)
- DO2 & DO3: 40 Vdc / 3 A (Resistive Load)
- UL-recognized: 30 Vac
- UL-recognized: 42 V Peak, Maximum
- UL-recognized: 60 Vdc, Maximum
Repeatability
- ≤ 0.03% of Reading
Reverse Polarity Protection
- Protected Against Reverse Polarity
Screw Material
- Stainless Steel
Seat / Seal Material
- Seal: FEP
- Seal: FKM
- Seal: PTFE
Shaft Material
- Stainless Steel
Shock
- EN 60068-2-27
Supply Voltage
- 27 Vdc Regulated
Switch Type
- Transistor (NPN or PNP)
Vibration
- EN 60068-2-6
Viscosity
- < 5 MPa.s
- > 5 MPa.s
- 1 Pa.s, Maximum
Wetted Materials
- Rotor: PPS
- Sensor Fitting, Rotor: 316F Stainless Steel (1.4401)
- Sensor Fitting, Rotor: Aluminum
