Jamesbury Figure 1059 Gas Shutoff & Vent Valve

Brand: Metso

The Jamesbury Figure 1059 Automatic Safety Gas Valves are Australian Gas Association (AGA) approved for providing protection against fire and explosive hazards during light-off and operation of gas-burning equipment. 

When the electrical signal is interrupted, these gas-line valves operate rapidly to isolate or allow gas flow. This action may be initiated either by safety trip or normal shutdown sequencing. 

The unit consists of a valve with actuator, limit switch, and solenoid valve, and are approved as an assembly. 

Flange valves are available in ASME Class 150 and Class 300 1/2" through 6" (DN 15 to 150) standard port and full port sizes. 

Screwed end and socket weld valves are available in ASME Class 600 1/2" through 2" (DN 15 to 50) standard port and 1/2" through 1-1/2" (DN 15 to 40) full port. 

Valves are offered with either carbon steel or 316 stainless steel bodies. 

Trim is 316 stainless steel.
Features
  • Polymeric flexible lip seat design offers tight shut off in either direction and extended cycle life with minimum maintenance
  • Automatic quarter-turn rotation is provided by a choice of spring-diaphragm or spring-return piston actuators
  • 316 stainless-steel valves are available for highly corrosive atmospheres. Actuators are especially well-suited to industrial environments
  • Limit switches are actuated directly from the valve/actuator drive train, reliably communicating a true valve-position

Specifications

Brand

Actuator Type

  • Spring Diaphragm
  • Spring Return

Approvals & Certifications

  • ATEX
  • PED

Approvals & Certifications

  • AGA

Electrical Contacts

  • Normally Closed
  • Normally Open

Electrical Rating

  • 0.3 A at 125 Vac - QX4XK02SDM SPST Switch Configured as SPDT
  • 0.3 A at 125 Vdc - QX4XK02SDM SPST Switch Configured as SPDT
  • 0.5 A at 125 Vdc - QX2VK02SDM SPDT Mechanical Switch
  • 0.5 A at 30 Vdc - QX2WK02SDM SPDT Gold Contacts Mechanical Switch
  • 1 A at 125 Vac - QX2WK02SDM SPDT Gold Contacts Mechanical Switch
  • 10 A at 125/250 Vac - QX2VK02SDM SPDT Mechanical Switch

Enclosure, Body Material

  • Valve: Carbon Steel
  • Valve: Stainless Steel

Flange Size - 1-1/2" (DN40)

  • 1-1/2" (DN40) - 150# (ASME)
  • 1-1/2" (DN40) - 300# (ASME)
  • 1-1/2" (DN6) - 600# (ASME)

Flange Size - 1-1/4" (DN32)

  • 1-1/4" (DN32) - 150# (ASME)
  • 1-1/4" (DN32) - 300# (ASME)
  • 1-1/4" (DN6) - 600# (ASME)

Flange Size - 1" (DN25)

  • 1" (DN25) - 150# (ASME)
  • 1" (DN25) - 300# (ASME)
  • 1" (DN25) - 600# (ASME)

Flange Size - 1/2" (DN15)

  • 1/2" (DN15) - 150# (ASME)
  • 1/2" (DN15) - 300# (ASME)
  • 1/2" (DN15) - 600# (ASME)

Flange Size - 2" (DN50)

  • 2" (DN50) - 150# (ASME)
  • 2" (DN50) - 300# (ASME)
  • 2" (DN50) - 600# (ASME)

Flange Size - 3" (DN80)

  • 3" (DN80) - 150# (ASME)
  • 3" (DN80) - 300# (ASME)

Flange Size - 3/4" (DN20)

  • 3/4" (DN20) - 150# (ASME)
  • 3/4" (DN20) - 300# (ASME)
  • 3/4" (DN20) - 600# (ASME)

Flange Size - 4" (DN100)

  • 4" (DN100) - 150# (ASME)
  • 4" (DN100) - 300# (ASME)

Flange Size - 6" (DN150)

  • 6" (DN150) - 150# (ASME)
  • 6" (DN150) - 300# (ASME)

Operating Pressure

  • psi: 275 to 1,200 (kPa: 1,896 to 8,273, bar: 18.96 to 82.73), Maximum

Port

  • Full
  • Reduced
  • Standard

Response Time

  • Fail Operation: < 1 second

Seat / Seal Material

  • Flexible Lip Seat: Polymeric
  • Seat: PTFE
  • Seat: XTREME

Supply Pressure - Maximum

  • Actuator - psi: 60 (kPa: 410, bar: 4.1)

Switch Type

  • DPDT
  • SPDT
  • SPST

Trim Material

  • Stainless Steel

Valve Size

  • 1/2" to 6" (15 to 150 mm)

Valve Type

  • Solenoid Valve

Voltage

  • Solenoid: 120 Vac at 60 Hz
  • Solenoid: 24 Vdc

Welded Connection

  • 1" Socket Weld End
  • 1/2" Socket Weld End
  • 1-1/2" Socket Weld End
  • 1-1/4" Socket Weld End
  • 2" Socket Weld End
  • 3/4" Socket Weld End
show more