Images are representations only.
6511 5/2-Way Solenoid Valve
Brand: Burkert Fluid Control Systems
Type 6511 consists of the pilot flipper solenoid valve Type 6144 and a pneumatic seat valve.
The Flipper principle allows switching of high pressures with low power consumption and with short switching times. All valves are equipped with manual override as a standard.
Type 6511 is extendable and preferably with a cable plug at the back of the valve island, Type 8640, and with the plug connection at the front of the valve block in the pneumatic control actuators.
Specifications
Actuator Type
- Pneumatic
Ambient Temperature Range
- 0° to 55° C (32° to 131° F)
Approvals & Certifications
- VDE 0580
BSP Connection
- G 1/8"
Duty Cycle
- Continuous Operation (100% ED)
Electrical Connectors
- Pneumatic Module: Typical MP02 with M5
- Push-In Connection [Diameter (4 mm)]
- Rectangular Plug, 2-Pin with Raster (5.08 mm)
Enclosure, Body Material
- Polyamide (PA)
- Polyphenylene Sulfide (PPS)
Environmental Protection
- IP40
Flow Rate
- Air: 130 QNn (l/min)
Media
- Dry Compressed Air
- Lubricated Oil Free
- Neutral Gases (5 μm Filter Recommended)
Mounting
- DIN/EN Rail 50045
- Manifold Mounting on Wall
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- 1/8" NPT
Operating Voltages
- 24 Vdc
Orifice Size
- 0.09" (2.50 mm)
Override
- Manual Override
Power
- Nominal: 0.8 W
Pressure Range
- psi: 36.26 to 145 (kPa: 250 to 1,000, bar: 2.5 to 10)
Process Temperature
- 0° to 50° C (32° to 122° F)
Response Time
- Closing: < 10 milliseconds - According to ISO 12238
- Opening: < 15 milliseconds - According to ISO 12238
Seat / Seal Material
- Seal: FKM
- Seal: NBR
Solenoid Type
- 5/2-Way
Tolerance
- Voltage: ± 10%
