Images are representations only.
Appleton™ APPFT 25kAIC Power Distribution Panelboards
Brand: AppletonAppleton™ explosionproof, dust-ignitionproof, watertight APPFT 25kAIC power distribution panelboards are used to furnish protection and control of electrical equipment in hazardous locations. These compact units provide a centrally controlled switching system for large quantities of branch circuits for lighting, heating, small motors and similar electrical equipment.
Features- Explosionproof, dust-ignitionproof, watertight. Features a precision machined flame path between body and cover and an O-ring gasket to insure watertight integrity
- Factory sealed; no external seals are required for most branch circuits. All conduits must be sealed adjacent to enclosure for Class I, Division 1, Groups C and D
- 100 Amp or 225 Amp main lug
- Up to 100 Amp backfed main breaker available with main lug chassis
- Up to 225 Amp main breaker available with main breaker chassis
- Factory installed ground and neutral bar as standard
- Breaker operators included as standard and can be padlocked in the ON or OFF position
- Breakers are housed in the panel section and prewired to maximum circuit capacity, then wired to numbered terminals in the wiring compartment. The terminal compartment is interconnected to panel section with sealing hubs, unions and poured with sealing c
- Permits selection of 1-, 2- or 3-pole breaker
- Bolt on stainless steel slotted mounting feet
- All panelboards are supplied with Cutler-Hammer interiors
- Chassis assembles with mains at top (bottom optional). Provisions for 12, 18, 24, 30, and 36 circuit 1-pole chassis
Specifications
Brand
Branch Breaker Option
- APPF F-Frame Only. 1A or 1B, or 2A or 2B Auxiliary Switch, Shunt Trip, & Under Voltage Release are available. See Catalog Pages for Details
Main Breaker Options
- APPF GHB Only. 1A or 1B, or 2A or 2B Auxiliary Switch, Shunt Trip, & Under Voltage Release are available. See Catalog Pages for Details
NEC Certifications & Compliances
- Class I, Division 1 & 2, Groups C, D, Class I, Zone 1, Group IIB, Class II, Division 1 & 2, Groups E, F, G, Class III, NEMA 4, 4X, 7B, C, D, 9EFG
Optional Material
- For Stainless Steel Terminal Enclosure for Division 2 Applications Only, Contact Your Local Sales Representative
Panel Options
- Breather, Drain, External Ground Stud, Grounding Neutral Lug, Terminal Breaker or Main Breaker Located at Bottom, Phenolic Nameplate & +50° C (+122° F) Breaker Rating are available. See Catalog Pages for Details
Standard Finishes
- Enclosure & Cover have a Corrosion Resistant Gray Epoxy Powder Coat to Provide NEMA 4X Rating
Standard Materials
- Copperfree (4/10 of 1% Max.) Aluminum Enclosure, Cover & Breaker Operators. Quad-Lead™, Captive, Stainless Steel Cover Bolts. Stainless Steel Hinges, Neoprene O-Ring & Copper Bus Bars.
