Burkert pH or ORP Meter, 8202
Images are representations only.

8202 pH or ORP Meter

Brand: Burkert Fluid Control Systems
Request Information
Favorite

Burkert pH or ORP Meter, 8202 Burkert pH or ORP Meter, 8202 Burkert pH or ORP Meter, 8202 Burkert pH or ORP Meter, 8202
The Type 8202 is a compact measuring device designed for the measurement of:
  • The pH in clean liquids or liquids containing solids, sulphides or proteins
  • The oxidation-reduction potential (ORP) in clean liquids or liquids containing solids, sulphides or proteins which may present low conductivity.
The meter consists of a replaceable 120 mm standard PG13.5 pH or ORP probe Type 8203 with S8 Connector, screwed in a probe holder with integrated Pt1000 temperature sensor. This ensemble is plugged-in and screwed with a nut to an enclosure with cover containing the electronic module and a removable display. Thus the Burkert meter facilitates short installation and maintenance effort.
Features
  • Integral compact measurement device for direct connection to control level (PLC)
  • Usage of 120 mm standard PG13.5 pH/ORP-probes with S8 connector 
  • Simulation of process value and diagnostic function

View Details

Specifications

Brand

Ambient Temperature Range

  • Operating & Storage without Probe: -10° to 60° C (14° to 140° F)

Approvals & Certifications

  • CE
  • EU Directives
  • FDA
  • UL (C,US): UL 61010-1 + CAN/CSA-C22.2 No.61010-1

BSP Connection

  • G 1-1/2" Male

Circuit Protection

  • Short Circuit: Protected for Transistor Outputs

Compensated Temperature

  • Automatic (Integrated Pt1000) - Reference Temperature 25° C (77° F)

Consumption

  • Current (3 Outputs Meter [2-Wire]): ≤ 25 mA at 14 Vdc without Transistor Loads, with Current Loop
  • Current (4 Outputs Meter [3-Wire]): ≤ 5 mA at 12 Vdc without Transistor Loads, without Current Loop
  • Current: ≤ 1 A with Transistor Loads

Cover Material

  • Polycarbonate (PC)

Current

  • 4-20 mA

Diameter

  • Pipe: 0.9 to 4.3" (25 to 110 mm)

Electrical Connectors

  • 3 Outputs Meter (2-Wire): 1 x 5-Pin M12 Male Fixed Connector
  • 4 Outputs Meter (3-Wire): 1 x 5-Pin M12 Male & 1 x 5-Pin M12 Female Fixed Connectors
  • PG13.5
  • Shielded Cable

Electrical Protection

  • Voltage Peak: Protected

Enclosure, Body Material

  • 316L Stainless Steel, 1.4401
  • PPS

Environmental Protection

  • IP65
  • IP67

Function

  • Diagnostic

Humidity

  • ≤ 85% Relative Humidity, Non-Condensing

Loop Impedance

  • 3 Outputs Meter (2-Wire), 4 Outputs Meter (3-Wire): 1,100 ohms at 36 Vdc, Maximum
  • 3 Outputs Meter (2-Wire), 4 Outputs Meter (3-Wire): 610 ohms at 24 Vdc, Maximum
  • 3 Outputs Meter (2-Wire): 180 ohms at 14 Vdc, Maximum
  • 4 Outputs Meter (3-Wire): 100 ohms at 12 Vdc, Maximum

Materials of Construction

  • Display: Polycarbonate (PC)
  • Fixed Connector Mounting Plate: 316L Stainless Steel, 1.4401
  • Fixed Connector: Brass Nickel-Plated
  • Navigation Key: PBT

Measuring Error

  • ORP Measurement (Measurement Deviation): ± 3 mV
  • pH Measurement (Measurement Deviation): ± 0.02 PH
  • pH Measurement (Measurement Deviation): 0.5 mV
  • Temperature Measurement (Measurement Deviation): ± 1° C (1.8° F)

Measuring Range

  • ORP Measurement: -2,000 to 2,000 mV
  • pH Measurement: -2 to 16 PH
  • pH Measurement: -580 to 580 mV

Mounting Position

  • Vertical Position with An Angle of ± 75°, Maximum

Nut & Bolt Material

  • Nut: PVC
  • Nut: PVDF

Output

  • 4-20 mA
  • Transistor (NPN): 0.2-36 Vdc

Output Format

  • Open Collector (700 mA & 0.5 mA - Maximum

Power Supply

  • 3 Outputs Meter (2-Wire): 14-36 Vdc, Filtered & Regulated
  • 4 Outputs Meter (3-Wire): 12-36 Vdc, Filtered & Regulated

Pressure Range

  • psi: 0 to 232 (kPa: 0 to 1,600, bar: 0 to 16)

Process Temperature

  • with PVC Nut Connection: 0° to 50° C (32° to 122° F)
  • with PVDF Nut Connection: -20° to 130° C (-4° to 266° F)

Resolution

  • ORP Measurement: 1 mV
  • pH Measurement: 0.001 PH
  • pH Measurement: 0.1 mV
  • Temperature Measurement: 0.1° C (0.18° F)

Response Time

  • 10 to 90%: 150 milliseconds

Reverse Polarity Protection

  • Protected Against Reverse Polarity

RTD Type

  • Pt1000

Screw Material

  • Stainless Steel

Seat / Seal Material

  • Seal: EPDM
  • Seal: Silicone

Switch Type

  • Transistor (NPN & PNP)

Temperature Range

  • Minimal Temperature Scale: 10° C (18° F) [i.e 10° to 20° C (50° to 68° F) Corresponding to 4-20 mA]
  • Temperature Measurement (Measuring Range): -20° to 130° C (-4° to 266° F)

Wetted Materials

  • Probe Holder: 316Ti Stainless Steel, 1.4542
  • Probe Holder: PVDF

Documentation

Data Sheets

show more