Emerson Appleton Conduit Outlet Body, NEC
Images are representations only.

Appleton™ NEC 6x8x Mogul Conduit Outlet Bodies, Covers and Gaskets

Brand: Appleton
Request Information
Favorite

Emerson Appleton Conduit Outlet Body, NEC
Appleton™ NEC 6x8x Mogul Conduit Outlet Bodies, Covers and Gaskets feature larger body sizes to facilitate the pulling of large and heavy conductors. They have specially designed raised cast covers that provide additional wiring area. These conduit bodies are ideal for pulling straight, 45° or 90° angle turns and/or making taps and splices.
Features
  • Exclusive built-in rollers facilitate cable pulling. Available on NEC 6x8x Series Moguls (C, LB and UB) in sizes 1-1/4" and up.

  • Smooth, rounded integral bushing in each hub protects conductor insulation.

  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity.

  • Covers have captive stainless steel screws to speed installation, prevent "freezing" of screws.

  • LB and UB Moguls. Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds six times the trade diameter of the conduit per NEC 314.28(A)(2). Bending Space Requirement: these moguls also meet the NEC 314.28(A)(2) Exception requirement spelled out in NEC 312.6(A) Table.

  • C Moguls. Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds eight times the trade diameter of the conduit per NEC 314.28(A)(1). Bending Space Requirement: not applicable.

  • LL and LR Moguls. Like LB moguls, these moguls have an end hub. The second hub is in the side (LL left and LR right) instead of the back.

  • T Moguls. These are like "C" moguls (1" thru 4"), except with an additional middle side hub. Distance between the centerline of each "C" hub conduit stop exceeds eight times the trade diameter of the conduit per NEC 314.28(A)(1).

    • Specifications

    Brand

    NEC/CEC Certifications & Compliances

    • Suitable for use in Class I, Division 2 Hazardous Locations Per NEC 501.10(B)(4)

    Standard Materials & Finishes

    • Malleable Iron Bodies & Covers have Triple-coat Finish (1) Zinc Electroplate, (2) Chromate, & (3) Epoxy Powder Coat, Steel Covers have Zinc Electroplate, Copperfree (max. 4/10 of 1%) Aluminum Bodies & Covers with Epoxy Powder Coat, Stainless Steel S

    Documentation

    Catalogs

    show more