Images are representations only.
5404 Servo-Assisted 2/2-Way Piston Valve
Brand: Burkert Fluid Control Systems
The 5404 valve is a servo-assisted piston valve available in both NC and NO versions.
A minimum differential pressure is required for the valve switching function. The standard brass housing satisfies all European drinking water requirements.
The solenoid coils are moulded with high-quality polyamide.
For reduced energy requirement, all coils can be delivered with electronic power reduction.
In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class P65.
Features- Servo-assisted piston valve with diameter of up to DN 25
- Vibration-proof, screwed coil system
- Moulded housing with high surface quality
- Explosion proof versions
- Suitable for gas and steam applications
Specifications
Ambient Temperature Range
- Maximum
Applications
- Gas & Steam Applications
Approvals & Certifications
- ATEX: PTB 14-ATEX-2023 x II 2 G Ex Mb IIC T4 Gb II 2D Ex Mb IIIC T130° C (266° F) Db, PTB 15-ATEX-1011U
- IEC Ex PTB 14.0049 x Ex Mb IIC T4 Gb Ex Mb IIIC T130° C (266° F) Db, PTB 15.0037U
- UL
- UR
BSP Connection
- G 1" Female
- G 1/2" Female
- G 3/4" Female
- 1" BSPT Female
- 1/2" BSPT Female
- 3/4" BSPT Female
Consumption
- Power Consumption Hold AC (Hot Coil): 14-16 VA
- Power Consumption Hold AC (Hot Coil): 7-8 W
- Power Consumption Hold DC (Hot/Cold Coil): 8/9.5 W
- Power Consumption Hold DC (Hot/Cold Coil): 9 W - Ex Coil with Internal Rectifier
- Power Consumption Inrush AC: 24 VA
- Power Consumption Inrush, Hold AC (Hot Coil): 9 VA - Ex Coil with Internal Rectifier
Cover Material
- Brass
Duty Cycle
- 100% Continuous Rating
Electrical Connectors
- Form A for Cable Plug Typical 2508
- Junction Box
- M20 x 1.5
- Tag Connector According to DIN EN 175301-803
Electrical Contacts
- Normally Closed
- Normally Open
Enclosure, Body Material
- Brass
Environmental Protection
- IP65 with Cable Plug
- Vibration-Proof
Flow Rate
- Water: 2 to 10 Kv (m³/hour)
Insulation
- Coil Insulation Class H
Internal Part Material
- Brass
- Stainless Steel
Materials of Construction
- Armature Guide Tube: 305 Stainless Steel, 1.4303
- Coil, Cable Plug: Polyamide
- Coil: Epoxy
- Stopper, Plunger: 430FR Stainless Steel (1.4105)
Media
- Compressed Air
- Hydraulic Oil
- Neutral Media
- Water
Mounting Position
- Preferably with Actuator Upright
NPT Connection
- 1" NPT Female
- 1/2" NPT Female
- 3/4" NPT Female
O-Ring Material
- FKM
- NBR
Orifice Size
- 0.47" to 0.98" (12 to 25 mm)
Piston Material
- Brass
Pressure Range
- Liquids & Gases - psi: 14.5 to 725.2 (kPa: 100 to 5,000, bar: 1 to 50)
Process Temperature
- 0° to 100° C (32° to 212° F)
Response Time
- Closing: 100 to 1,500 milliseconds (Depending on Orifice & Differential Pressure)
- Opening: 20 to 400 milliseconds
Seat / Seal Material
- Piston Seal: PTFE
- Plunger Seal: FKM
- Plunger Seal: NBR
Solenoid Type
- 2/2-Way
Spring Material
- 301 Stainless Steel, 1.4310
Tolerance
- Voltage Tolerance: ± 10%
Voltage
- 24 Vdc
- 24-230 V / 50 Hz, UC
